This IDE AHCI Mode Driver is for WINXP SP2 only.
You do not need to install it on VISTA OS.
you only need to install it when you set IDE to AHCI Mode  and install
 WINXP SP2.



Create the AHCI Driver diskette procedure:

1. Under the folder \8227\xp32\ahcixp  , Run F6flpy32.exe Program under winXP.
2. IT will ask you to insert a Floppy Diskette , then format it and
   Create the Driver diskette.




How to use the AHCI Driver diskette:
Note: you only need it when you set the IDE to AHCI mode on BIOS SCU and 
     install WINXP SP2. 

1.  Insert the USB Floppy drive with AHCI Driver diskette
1.  Boot from WINXP SP2 OS. CD.
2.  Press [F6]  to select the Three Party SCSI or Raid Driver to 
    install.
3.  select the "Intel(R) 82801HEM/HBM SATA AHCI Controller (Mobile 
    ICH8 )"



